martedì 7 aprile 2015

Alessia Mazzoleni and the gum printing


The technique
The gum printing is a technique imported from America.
It starts with a normal digital file that we bring to the copy center to print it as an old toner Xerox machine. This technique works only with the copiers whose resinous powder is fixed to the paper by an eletro-thermical process. It is not applicable to photographs printed with laser printers, or inkjet printers because this kind of inks are not able to hold the chalcography ink we are going to spread later on the paper matrix.
These old Xerox style printers are already a bit difficult to find, so when you are sure to have found the right shop where to start your process, you are already at a good point.
The dimensions of the prints depend by the dimesions printed by the copier.
Once we have made our “photocopy”, in a short time we have to treat the paper because the fresh toner retain more ink as a matrix.


So, we brush the back of the paper with a solution of shellac dissolved in alcohol at 100° we have praipared before. We need 150-200 grams of shellac per liter of alcohol.
We proceed in this way with shellac because this solution helps to harden and hold together the paper fibers that undergo a treatment done with a lot of water that might pulping photocopy.
We need to brush in this way at least 3-4 times the small paper (until 8X10 inches), while for larger sizes such as bed sheets it is necessary to brush the photocopy 6 or 7 times.
This has done because when the photocopy is wet it becomes heavy and likely to tear under its own weight
After drying our paper, we take the arabic gum and add distilled water very hot in a dosage of 1 : 2 (1 part of arabic gum to 2 parts distilled water), turns and photocopy, spreading the solution of water and arabic gum on the side where there is the image formed by the toner.
The arabic gum should be applied with a sponge for three times throughout the sheet.
We put the arabic gum with the sponge and we take it away from the white areas with the water annd we have to do this passage again after every inking phase.
The image chosen to be transformed into “Gum print” can be a drawing, a photograph, or other types of graphic composition, but it must be suitable to undergo this treatment.
Typically, the subjects a bit cotrasted are more suitable to be printed with this technique, it is still the possibility of developing our file with Photoshop before bringing it into the copy shop to enhance its characteristics as to make more evident.




Once our photocopy was prepared with shellac and gum arabic, you can place the sheet to be inked on a smooth and homogeneous plan, so that it adheres well to this support and avoid surprises during the inking that must be smooth and homogeneous. A glass plate, or a plexiglass can be good for this purpose.After that we take the roller with ink by intaglio printing and apply it on the photocopy to the side of the toner.
The toner has the property of retaining the ink, while whites have been made impermeable to the ink by the fact that arabic gum has become fixed in the black parts of the paper.
We start from a positive image, because the blacks will be played blacks (or the color with which you will be inking the matrix), while whites will remain white.as in a mirror.
This defect can be corrected before, always with Photoshop, or if it is not a problem, the image can be left with the left and right sides reversed.
This can happen if there are architectures where the change of sides is not perceived, as in architecture or landscapes which do not contain written.
Once the matrix is inked, we take the sheet to print (dry, do not get wet as happens for intaglio printing, because already the photocopy that serves as the matrix is wet) and we position it in contact with the toner part already inked, we align the paper and we put the everything under the press, even a couple of times.
At the end we detache the sheet of paper from the matrix and our gum printing will be ready once the ink has dried.


The matrix can be used up to a maximum of 5 times because the water and the pressure of the press spoil the paper. If you really did a good job, you also can manage to get six copies, but it is rare. Those tiny papar may last slightly longer.
In fact, the first printing is not considered, it is not good because the matrix needs to take the ink well. The first print is done on an ordinary sheet because you have a result a bit patchy and the black is not perfect.


The artist
Alessia Valentina Mazzoleni learnt this technique thanks to Chiara Giorgetti who was her teacher of printmaking at the Brera Fine Art Academy of Milan. 
Chiara Giorgetti liked Alessia's works and asked her to make them with the gum printing.
Alessia  partecipated to a couple of exhibitions, one in Bozen (Südtirol), the other in Munchen (Bavaria). In Bozen she sold her very large print of approximately cm. 190 X 90 for 400 euro. In the case of this subject, the matrix from the print was pulled was very large, it was destroyed in the third passage under the press.











Conclusion
The Gum print has the charm of engraving intaglio, adding to it to the charm of photography because the incisions, usually, are drawings and have a different look.
The photographs printed with ink offer a very special result and this is the atmosphere that can be suited to special subjects because they take a consistency more material that allowed to the author to get the effect that she pursued.
For the industrial subjects getting a very deep black, and having the ink a little smudged, or at least that aspect not too precise goes very well with the theme of the subjects. 
In this case, language and art go hand in hand to give more energy to the images. Tony Graffio


Alessia Valentina Mazzoleni, 25 y.o. artist and printer
(Canon A1 and Fujicolor 200)


Note: those that desire to read the original interview in italian can find it in Fragments of Culture, my other art and culture blog.


Alessia seen by Tony Graffio
(Canon A1 Fujicolor 200, prismatic filter and elaboration in PS)

mercoledì 11 marzo 2015

Kodak Brownie Mania

Divertirsi con pochi soldi, mettersi al collo una fotocamera dal design accattivante, per di più d'autentico modernariato? 
Senza contare che si tratta di un pezzo made in England capace d'ottenere delle belle immagini stile Lomo! 
Il tutto spendendo meno che acquistando una Holga?
Sembrerebbe impossibile, invece si può fare alla grande, grazie al giovane designer mantovano di 25 anni, Andrea Mambrini, che le ha tolte dall'ibernazione e le sta facendo rivivere per tutti noi, dandole per di più anche quel tocco di oggetto difficilmente reperibile, in qualche modo d'élite, che non guasta mai.
Di cosa sto parlando?
Ma delle Brownie, ovviamente. Le simpatiche fotocamere che Kodak ha prodotto per quasi 60 anni in ogni forma, versione e formato; cosa che ne può incrementare ancor più il collezionismo, o la ricerca.

Kodak Borownie mania
Andrea e la sua Brownie preferita, una Starlet

In molti sono convinti che la curiosità sia un difetto, eppure è proprio dalla passione per come funzionano le cose e dal desiderio di guardarci dentro che Andrea ha sviluppato la sua ingegnosità, nonché il gusto di poter riutilizzare oggetti che non sono mai veramente passati di moda e sanno conquistare nuove schiere di giovani fotografi.

<Devi aprirle per capirle, sono semplici, ma funzionali>
Andrea s'esprime così parlando delle fotocamere della Kodak prodotte a Londra fin dagli inizi del secolo scorso.

<You have to open them to understand them, they are simple, but functional>
Andrea has expressed himself so talking of the Kodak cameras produced in London since the beginning of the last century.

L'Italia è sempre stato un paese in cui ci sono stati problemi da risolvere in modo urgente relativamente alla sopravvivenza quotidiana ed alla conquista dei normali diritti per le genti più umili, rispetto a ciò che accadeva nei paesi più industrializzati ed alle condizioni di vita dei loro abitanti che, già ai primi del 1900, godevano di un sistema politico e sociale più solido e democratico, nonché di uno stato di diritto a tutti gli effetti applicato ad ogni cittadino, indipendentemente dalle sue idee, sesso, religione o status economico, cosa che sembra essere tutt'ora da essere messa in pratica, qui da noi nel paese più bello del mondo: Furbilandia (dico questo non perché ieri sia stato assolto un importante uomo politico italiano, ma perché sono sempre i soliti onesti ad essere penalizzati da questo sistema truffaldino).
E' stato così che mentre con un dollaro, o una sterlina si poteva comprare una fotocamera Kodak Brownie, in Italia solo i fotografi professionisti, generalmente nobili, aristocratici, o persone di un alto livello sociale, potevano permettersi di stare dietro una pellicola, o lastra che fosse, mentre facevano scattare un otturatore.
La vera popolarità della diffusione della fotografia e degli strumenti necessari per catturare le immagini in Italia sono slittati di circa 50-60 anni rispetto a Regno Unito, Francia, Germania ed, ovviamente, USA. 
Solo dopo il boom economico del decennio 1954-1964, l'italiano medio ha scoperto il gusto di comprarsi la prima fotocamera e comporre da solo i soggetti dei quali avrebbe poi registrato l'immagine, con l'intervento di fotocamere economiche made in Italy che spesso utilizzavano il formato 127 all'interno scatole a tenuta di luce di marche anch'esse scomparse, come Ferrania o Bencini, per citarne due tra le più conosciute.

Parte delle fotocamere recuperate da Andrea a Londra e dintorni

Le piccole Brownie a forma di parallelepipedo, hanno consentito all'uomo della strada di compiere la propria rivoluzione fotografica, semplicemente premendo un bottone, mentre Kodak, poi, avrebbe fatto il resto del lavoro.
Per aver portato la fotografia in ogni casa, ognuno di noi dovrebbe essere grato a questo prodotto che nella sua semplicità era geniale ed abbastanza robusto. 
Lavorando con un tempo di scatto intorno a 1/50 di secondo ed un diaframma molto chiuso, circa f 8, f 11 queste simpatiche scatolette consentivano d'avere grande profondità di campo, senza fare nessun'altra regolazione. 
Nei primi tempi le fotocamere Brownie erano costruite in cartone, mentre più tardi verranno fatte di bachelite, plastica e metallo.

La Starlet è un genere di fotocamera punta e scatta  che, grazie ad una lente addizionale, è adatta a riprendere anche ritratti ravvicinati

Qui Andrea ci mostra una Starflash molto speciale, una Startech per usi odontoiatrici nella sua confezione originale, praticamente nuova e due caricatori di pellicola, uno di essi è stato modificato per montare pellicole 135. 
Alle Brownie appartengono tutte le Star, in cui troviamo ad esempio Starlet, Starflash, Starmite e via di seguito. Quella grigia è una Startech, modello particolare di Starflash ma con diaframmi molto chiusi per mettere a fuoco da vicino. 

Here Andrea shows us a very special Starflash, a Startech for dental uses in its original packaging, practically new and two magazines of film, one of them has been modified to fit 135 film.
All the Star belong to the Brownie family, in which we find such Starlet, Starflash, Starmite and so on. That gray is a Startech, particular model of Starflash with diaphragms but very closed to focus close up.

Circa 3 anni fa, quando ancora frequentava il Politecnico alla Bovisa, Andrea ha letto un articolo che descriveva le Brownie sul National Geographic Magazine e da allora s'è messo a ricercare le box camera per rimetterle in sesto e poterle riutilizzare.
E' stato durante suo periodo universitario (concluso da poco) che Andrea ha iniziato a fotografare ed appassionarsi a certe soluzioni, in qualche modo poco comprensibili per qualcuno abituato ai computer più che alla chimica ed alla sensitometria. 
Con i suoi coetanei ha scoperto il mezzo digitale, per poi ri-orientarsi verso la fotografia tradizionale che permetteva di sperimentare delle tecniche più creative, o meno controllabili, come le doppie esposizioni e l'utilizzo di emulsioni scadute con l'imprevedibilità di certe strane affascinanti colorazioni.

Fotografia in striscia fatta in Norvegia, più precisamente si tratta di una pellicola dove sono stati effettuati 24 scatti in cui il giovane designer autore dello scatto s'è scordato di girare la manovella di avanzamento del film. Ne è uscito questo scatto unico che si mescolano colori freddi. Le dominanti di quei paesaggi in quel periodo ci evocano più emozioni, rispetto alle fotografie digitali piene di dettaglio e forse più precise tecnicamente, ma forse proprio per questo meno poetiche.


Photographic strip made in Norway, more precisely it is a film on which were made 24 shots where the young designer author of the shooting has forgotten to turn the knob to advance the film. It came out this single-shot that mix cool colors. Casting those landscapes in that period evoke in us more emotions than the digital photographs full of detail and perhaps more technically precise, but less poetic.

La Holga è in qualche modo imparentata con le Brownie per via di un'ottica e di una meccanica imprecisa e delle aberrazioni cromatiche che si ottengono proprio a causa dell'utilizzo di uno strumento economico che induce a familiarizzare con un modo semplice di gestire la tecnica fotografica.

Non c'è poi gran che all'interno di una Brownie Six-twenty, un semplice sistema di trascinamento della pellicola, una molla che comanda una lamella metallica che funge da otturatore, l'alloggiamento per la pellicola i rocchetti, un obiettivo ad una sola lente a menisco che ha una focale di 90 mm sul formato 6X9, un paio di mirini a specchio, viti e cose così.
Poiché la messa a fuoco è fissa su infinito, esiste la possibilità d'agire su una levetta sul lato destro della fotocamera per spingere manualmente una lente addizionale davanti all'obiettivo e permettere di porre a fuoco i soggetti tra circa 1,5 metri e 3 metri, una distanza che consente così di realizzare i ritratti.

There is not so much inside a Brownie Six-twenty, a simple system for dragging the film, a spring which controls a metal plate that acts as a shutter, the housing for the film spools, a single meniscus lens that has a focal length of 90 mm on the format 6X9, 2 viewfinder with small mirrors, screws and stuff like this.
Because the focus is fixed at infinity, there is the possibility of acting on a lever on the right side of the camera to manually push an additional lens in front of the lens and allow you to put the focus on the subjects between about m. 1.5 and 3 meters, a distance that allows you to realize the portraits.


Dopo aver cercato di reperire informazioni riguardanti le Kodak Brownie, basandosi sulle metodologia di studio apprese in Università, Andrea inizia a guardarsi in giro per raccogliere qualche esemplare di fotocamera da smontare per vedere com'è fatta e poter rimettere in ordine per un normale utilizzo.
Un suo amico che vive a Londra lo aiuta a trovare fotocamere in buone condizioni e glie le spedisce in Italia.
La ricerca procede in maniera scientifica per riscoprire come nacque la fotografia, quasi 200 anni fa e per recuperare più modelli possibili di box camera.
Le Brownie, stile box camera numero 0 del 1900 vengono prodotte fino agli anni 1960 e sono proprio questi modelli che hanno un frontale con la grafica diversa, a secondo dell'anno di produzione che si rivelano essere i modelli più robusti ed affidabili ed sono queste le fotocamere importate e risistemate da Andrea. Basta poco sforzo per pulirle, smontarle, oliarle e rimetterle in funzione, alcune, dopo essere passate per le mani di Andrea sembrano proprio fotocamere uscite dalla fabbrica una settimana prima, anzi che 60 anni fa.
Andrea si dà da fare e mette in vendita le prime fotocamere rigenerate, non per trarne un guadagno, ma per costituire una comunità di fotografi con cui condividere questa passione, scambiare idee, immagini ed esperienze.
Non vuole essere l'unico a giocare con queste fotocamere, così ha subito reagito positivamente quando l'ho contattato per chiedergli di concedermi un'intervista ed un paio di giorni dopo mi ha raggiunto a Milano, dove dopo esserci conosciuti ci siamo capiti al volo su intenti e cose da dire, a proposito di questa riscoperta.

Kodak Brownie Starlet

Quando Andrea fotografava in digitale s'era reso conto di realizzare circa 3000 scatti alla settimana che erano press'a poco tutti uguali, questo fatto gli fece capire che ci doveva essere un'altra strada da percorrere perché gli eccessi non vanno mai bene e fare troppe fotografie faceva anche perdere molto tempo per rivederle, prima d'effettuare una scelta e decidere cosa tenere e cosa buttare.
Con la pellicola bisogna concentrarsi maggiormente in fase di ripresa, inoltre ogni scatto ha un costo, il che ti induce anche ad evitare di sprecare denaro, oltre che tempo.
Andrea vorrebbe cercare d'agevolare l'accesso al mondo della vera fotografia a persone che, come lui, si trovano davanti ad un percorso inverso per affrontare una tecnica del passato, sempre ricca di fascino e capace di dare molte soddisfazioni, dopo aver conosciuto le meraviglie contemporanee fatte di sensori elettronici e di pixel. 
Andrea ha inserito sulle box camera un paio di rocchetti supplementari di legno in modo da poter utilizzare le Brownie con i rullini 135 che sono più comuni, più economici, ma che in provincia si trovano in vendita pur sempre a circa 6 euro l'uno. Per non parlare poi della difficile reperibilità delle emulsioni per il bianco e nero e del 120.

Il portarocchetti della Starlet

Delle Brownie non si butta via niente
Una vecchia Six-twenty irrecuperabile riciclata come faretto

None Brownie has been thrown away
An old unrecoverable Six-twenty recycled as spotlight

A Londra esisteva una delle fabbriche europee della Kodak, probabilmente questo fatto ha reso anche molto popolare la sua diffusione nel Regno Unito e nei paesi limitrofi, mentre come abbiamo già visto, la passione per queste box camera, dai nostri padri e dai nostri nonni non è stato vissuto con lo stesso entusiasmo. 
L'Italia era un paese povero dove la radio ed il telefono hanno conosciuto una diffusione più veloce rispetto alla fotografia di massa.
Il modello Kodak Brownie 620 montava la pellicola 620 che aveva la stessa larghezza della 120, ma veniva raccolta da rocchetti di ferro più stretti, mentre la 120 aveva rocchetti più larghi di legno.
Esistono rocchetti di ferro anche per il 120, ma è molto più comune trovare rocchetti di plastica che possono facilmente essere montati sulle Brownie six-twenty, permettendo così d'utilizzarle senza problemi di reperibilità della pellicola.
Un discorso diverso riguarda le Starlet che montavano la pellicola economica dell'epoca: la 127, prima che questa scomparisse per lasciare il monopolio della fotografia di piccolo formato ai rullini 135.
Esistono un paio di soluzioni diverse per poter usare le Starlet che montavano i 127; in un caso bisognerebbe disporre dei rocchetti originali e tagliare la pellicola più larga, solitamente la 120 con degli appositi slitter, oppure sarebbe opportuno ingegnarsi in altro modo; il che vuol dire dover ricorrere ad una maggior manualità per il taglio al buio ed il ribobinamento. L'altro metodo prevede invece l'uso di adattatori che consentono di montare un paio di caricatori (uno pieno, l'altro vuoto) nell'alloggiamento del 127, cosa che poi dà luogo alla pellicola esposta anche attorno alle perforazioni.
Per chi invece volesse fare le cose per bene, consiglio di contattare l'amico Guido Tosi della Six Gates Film e farsi rifornire di 127  già pronto all'uso, oppure contattare PFG che ne distribuisce i prodotti. Tony Graffio

La Starlet monta la pellicola 127 che espone un fotogramma di cm 4X4

Delft (NL) dall'alto, scatto eseguito su una normale pellicola 120 inserita in una Kodak Brownie 620, formato cm 6X9 circa.

Mantova in B/N fotografia realizzata con una Kodak Brownie Starlet con gli adattatori per il 135

Le Kodak Brownie le potete trovare in vendita da Speed Photonel cuore della Bovisa, in via degli Imbriani n.55, Milano. Riflesso nello specchio in vetrina vediamo Roberto Tomasi, il geniale stampatore inventore del metodo Photo-Transfer.

Andrea mi ha detto che a breve qualche macchina fotografica delle sue si potrà trovare anche a Reggio Emilia da Foto Superstudio.

Le fotografie marchiate AM sono di Andrea e sono state realizzate con le sue Kodak Brownie, le altre sono di Tony Graffio

English text
Would you like to have fun with little money? 
Would you like to et a camera beautifully designed, like new, but 60 years old?
Not to mention that it is a piece made in England capable of obtaining good images in pure Lomo style!
All this for less of the price nedeed to buy a Holga?
It would seem impossible, but you can do great things, thanks to the young designer from Mantua, 25 years old, Andrea Mambrini.
He removed some old cameras from hibernation and he is reviving them for all of us, giving to them even more charme because they are not so easy to find in perfec conditions.
What I'm talking about?
But of the Kodak Brownie, of course. The nice box cameras the yellow house has produced for almost 60 years in every shape, size and version; thing that can increase even more its collectible interest.
Many are convinced that curiosity is a flaw, yet it is the passion for how things work and the desire to look inside everything that Andrea has developed his intelligence, as well as the taste of being able to reuse objects that have never really gone out of fashion and know how to win new legions of young photographers.
Italy has always been a country where there were problems to be solved urgently in relation to the daily survival and the conquest of the normal rights to the most humble people, compared to what happened in most industrialized countries and the living conditions of their inhabitants, already in early 1900, they enjoyed a political and social system more viable and democratic, as well as a state of law in effect applied to every citizen, regardless of his ideas, sex, religion or economic status, what that seems to be still to be put into practice, here with us in the most beautiful country in the world: Cleaverland (I say this not because it was yesterday acquitted a prominent Italian politician, but because they are always the same honest to be penalized by this rethink).
While with a dollar, or a pound you could buy a Kodak Brownie camera, in Italy only professional photographers, generally nobles, aristocrats, or people of a higher social level, could afford to stay behind a film, or slab that was, while they were taking a shutter.
The real popularity of the spread of photography and of the tools able to capture images in Italy have slipped by about 50-60 years than in the UK, France, Germany and, of course, USA.

Only after the economic boom of the decade 1954-1964, the average Italian has found the taste to buy his first camera and compose alone the subject of which would then record it, with the intervention of cheap cameras made in Italy frequently used format within 127 light-tight boxes of brands also disappeared, as Ferrania or Bencini, to name two of the most famous.


Small cuboid Brownie, enabled the man of the street to make his photographic revolution, simply by pressing a button, while Kodak, then, would do the rest of work.
For bringing photography into every house, each of us should be grateful to this product that was brilliant in its simplicity and robust enough for every days life.
Working with a shutter speed around 1/50 second and a diaphragm very closed about f 8 , f 11 these cute little boxes allowed to have great depth of field, without any other adjustment.

In the early days Brownie cameras were built of cardboard, and later will be made of bakelite, plastic and metal.


About 3 years ago, while still at the Bovisa Polytechnic, Andrea read an article describing the Brownie on the National Geographic Magazine and since then he has taken to research the box cameras to put them back on track and reuse.
It was during his time at university (recently completed) that Andrea began photographing and passionate about certain solutions, somewhat difficult to understand for someone accustomed to computers more than chemistry and sensitometry.

With his peers discovered the digital medium, and then re-orient themselves towards the traditional photography techniques that allow you to experience the most creative, or less controllable, such as double exposures and the use of expired emulsions with the unpredictability of some strange fascinating colors.

The Holga is in some way related to the Brownie due to inaccurate optics and mechanical able to produce chromatic aberrations and uncorrect expositions.

After trying to find information about the Kodak Brownie, based on the study methodology learned at University, Andrea begins to look around to collect some specimens of the camera to take apart to see how it is made and be able to tidy up for normal use.
A friend who lives in London helps him find cameras in good conditions and mails them to Italy.
The research proceeds in a scientific way to discover how the photography was born almost 200 years ago and to recover more possible models of box camera.
The Brownie box camera style number 0 of the 1900 are produced until the 1960s, and these are the models that have a front with different graphics, depending on the year of production that turn out to be the most robust and reliable models. These are the cameras imported and rearranged by Andrea. It takes little effort to clean them, take them apart, oil them and put them back into operation, some, after passing through the hands of Andrea cameras seem to leave the factory a week earlier, rather than 60 years ago.
Andrea works hard and puts on sale the first cameras regenerated, not for financial gain, but to build a community of photographers to share this passion, exchange ideas, images and experiences.
Do not want to be the only one to play with these cameras, so he immediately reacted positively when I contacted him to ask him to grant me an interview and a couple of days after he reached Milan, where after having met, we understood we had the same intent and things to say, about this rediscovery.

When Andrea photographed digitally he realized to shoot about 3000 photographs a week that were more or less all the same, this fact made him realize that there had to be another way to go because the excesses are never good and doing too many photographs was also losing a lot of time to review them, before you make a choice and decide what to keep and what to throw away.
With film you have to pay more attention to what you do, each shot also has a cost, which leads you also to avoid wasting money, as well as time.
Andrea would like to try to facilitate access to the world of real photography to people who, like him, are located in front of a reverse path to address a technique of the past, always fascinating and able to give a lot of satisfaction, after knowing the contemporary wonders made of electronic sensors and pixels.
Andrea has entered the room box in a couple of additional spools of wood in order to use the Brownie with the rollers 135 that are more common, cheapest, but which for who lives in the province 135 film still cost about 6 euro each. Not to mention the scarcity of emulsions for black and white and 120 films.

In London there was one of the European factories of Kodak, probably this fact has made it very popular its spread in the United Kingdom and neighboring countries, and as we have seen, the passion for these box camera, was not livedrom by our fathers and our grandfathers with the same enthusiasm.
Italy was a poor country where the radio and the telephone have experienced a spread faster than the mass photography.
The Kodak Brownie model 620 was equipped with the film 620 which had the same width of 120, but was collected from narrower spools of iron, while the 120 had larger wooden spools.
There are spools of iron for the 120, but it is much more common to find spools of plastic that can easily be mounted on Brownie twenty-six, allowing for use without problems of availability of the film.
A different concerns Starlet who rode the film economic era: the 127, before it disappears to leave the monopoly of photography of small format to the rollers 135.
There are a couple of different solutions in order to use the Starlet who rode the 127; in a case you should have the original spools and cut the film from a wider, format, usually a 120 film, using a special slitter, or would it be appropriate to strive otherwise; which means having to use a greater dexterity in the darkness for cutting and rewinding. The other method, however, makes use of adapters that allow you to mount a pair of chargers (one full, the other empty) into the 127, which then gives rise to the exposed film also around the perforations.
For those who want to do things in the right easy way, contact Guido Tosi of Six Gates Film and make supply of 127 ready to use, or contact PFG of Milan that distributes these products. Tony Graffio



martedì 17 febbraio 2015

Un fotografo di provincia mi parla del suo lavoro e della zincografia

Franco Franzini con una sua fotografia che ritrae una schermitrice

Ho conosciuto un fotografo di provincia che ha lavorato per un lunghissimo periodo della sua vita per un quotidiano locale e anche per riviste mensili ed altri ambiti che richiedevano la sua esperienza e l'utilizzo della fotografia, come veniva intesa nel periodo in cui il fotografo era riconosciuto come un abile creativo che agiva sia sul campo che in studio, adoperando il proprio gusto e conoscenze tecniche non comuni.
Ascoltando direttamente da Franco Franzini in cosa consisteva il suo lavoro ci si rende conto dei grandi cambiamenti della nostra società, delle esigenze del committente e della velocità con la quale si riuscivano a fare le cose in passato, grazie al contributo di varie figure professionali che ora sono completamente scomparse per lasciare spazio a poche persone che gestiscono la stampa a rotocalco di quotidiani e riviste.
Il processo produttivo per trasformare le fotografie in immagini da stampare su carta per mezzo di matrici a rilievo è molto cambiato negli ultimi 30 anni, da una tecnica fotomeccanica e chimica di tipo tipografico si è passati all'uso del computer per le tecniche digitali che poi vedono l'utilizzo di lastre di gomma, la flexografia.
Il sito stesso dove avveniva gran parte del lavoro fotografico, di preparazione della matrice e di stampa è oggi in condizioni di semiabbandono, è qui che ho incontrato Franco per capire come avvenissero le cose un tempo e subito m'è sembrato d'entrare in un mondo dimenticato che non interessa più nessuno, dove il nostro fotografo continua a muoversi come un unico essere sopravvissuto ad una epidemia che ha spazzato via tutti.
In un ambiente disordinato ed impolverato trovano ancora ricovero le attrezzature che servivano ad illuminare ed a riprendere i soggetti, qua e la montagne di negativi infilati in grandi sacchi, ma anche conservati con più cura.

Vecchie fotografie

In una stanza si trova un vecchio ingranditore Durst Laborator 3S con il piano basculante che serviva a stampare fino al formato di cm. 13X18 (5X7), ma anche a riprodurre le immagini di cui si volevano preparare le matrici di zinco per la stampa tipografica.

Il Laborator 3S

Moltissime fotografie qua e là raccontano le storie di una vita trascorsa a documentare gli avvenimenti che allietavano, divertivano o preoccupavano i concittadini di Franco.

La piena del grande fiume

Le tipiche barche del Po

In un salone più grande, su alcuni tubi d'alluminio, trova posto un fondale di carta che fa da sfondo ai personaggi ed agli oggetti ripresi in studio, è ancora presente un sistema d'illuminazione a luce diffusa, il bank aereo che negli anni 1970 era stata una grande innovazione, ma che ora utilizzano in pochi.

Una vecchia Fatif 13X18 è la fotocamera che Franco usa ancora oggi

In giro ci sono dei mobili, libri, grandi lastre di zinco, caratteri di piombo, stativi, vecchi corpi illuminanti ed altre cose. Non si riesce però ad accendere la luce perché i recenti temporali hanno probabilmente causato qualche corto circuito, pertanto restiamo per un po' in penombra; poi Franco traffica con dei cavi e riesce a ripristinare l'energia.

La camera oscura ed il Durst 609

In un'ultima stanza, un po' più piccola c'è un'altra camera oscura con un altro ingranditore Durst più piccolo: è un 609 che risale, come l'altro, intorno alla fine degli anni 1960, ogni tanto viene ancora usato per stampare i formati più piccoli, mentre il grande formato viene stampato a contatto.

Scarto negativo

Scarto positivo

Vengo a sapere che negli anni passati non c'era nemmeno bisogno della carta autopositiva, o delle Polaroid, se si voleva realizzare subito una stampa, ad una fiera, per esempio, o ad un altro evento pubblico in cui c'era la necessità di consegnare subito una stampa all'interessato, si fotografava il soggetto inserendo carta fotografica nello chassis, poi lo si sviluppava in bacinella e dopo averlo fissato, lavato e velocemente asciugato, lo si rifotografata con un'altro foglio di carta in modo da ottenere un positivo.
Riesco a farmi dare un foglio negativo da pubblicare sul blog, si tratta di uno scarto che aveva contaminato con gli acidi mentre operava questa dimostrazione lo scorso settembre a Castel San Giovanni, in mezzo a una gran folla che forse lo disturbava nel procedere con i suoi sviluppi.

Morin

Per la città, il fiume è fondamentale, Franco inizia a raccontarmi di tutta una serie d'episodi e di personaggi che non esistono più, ma che lui ha conosciuto e fotografato.
Un'altra sua passione era lo sport ed il pugilato in particolare.

Un momento di un combattimento di boxe fissato dalla fotocamera di F. F.

Mi fa vedere la fotografia che gli avevano fatto i suoi colleghi quando era andato in pensione e tante altre immagini che fanno parte della sua storia.
Resto un po' perplesso vedendo sacchi di plastica del tipo usati per buttare la spazzatura pieni di negativi e gli chiedo se me li può dare, ma lui dice che ne posso scegliere un solo spezzone. Nonostante sia già tutto materiale inservibile ed in pessime condizioni di conservazione, non se ne vuole privare, non si sa nemmeno se al quotidiano qualcuno si ricordi ancora che esista questo “archivio”.

Franco e alcuni vecchi negativi che ha pescato da un sacco della spazzatura

Ritengo che si tratti di scatti che non sono mai stati utilizzati e che probabilmente il giornale conservi solo quello che ha pubblicato, ma è una cosa che penso tra me e me, per giustificare a me stesso quello che vedo.
Da una parte resto perplesso, davanti a me c'è questo palazzo caduto nell'oblio ed uno spiazzo antistante che forse stanno solo attendendo d'essere venduti, ma dall'altra resto affascinato nel vedere quest'uomo che continua a mettere delle specie d'impalcature per puntellare un mondo che ormai gli è già crollato addosso, senza che lui potesse impedirlo.
Forse, in realtà, stiamo tutti vivendo un po' così di questi tempi nei quali non c'è dato di sapere quanto può durare l'ultima tecnologia, o perché non esistono più certezze su questo mondo e nemmeno di che cosa vivremo domani.
Finalmente, guardo Franco, lo riporto bruscamente nel tempo presente decidendomi a chiedergli quello che più mi interessa, per farmelo spiegare un po' più nel dettaglio.
Forse, lui è un po' deluso che io mi voglia far raccontare proprio uno dei passaggi del suo lavoro che probabilmente per lui non erano tra i più esaltanti.
Alla sua epoca, comprendo che si doveva lavorare tantissimo, di giorno si facevano i servizi fotografici, poi si sviluppavano le pellicole ed infine, di notte bisognava lavorare in tipografia per preparare le matrici delle lastre di zinco che poi sarebbero servite ad illustrare le pagine del giornale.
Per me si tratta di una lavorazione che non conoscevo e non ho mai visto, così cerco d'ascoltare con attenzione per capire se possa ancora essere di qualche utilità conoscere questa tecnica conosciuta come zincografia.

Un momento della vita lavorativa di Franco

<Per prima cosa bisogna riprodurre la fotografia che si è scelto utilizzando l'ingranditore, mettendo un reticolo tra la fotografia e la pellicola lith. L'obiettivo dell'ingranditore (riproduttore) riprende la fotografia, si mette il retino nel porta negativo e sopra la pellicola da esporre; si illumina il soggetto da riprodurre e si impressiona la pellicola lith, dopo si sviluppa la pellicola esposta nello sviluppo lith, si otterrà così un'immagine con un reticolo in mezzo di 25/40 linee/mm.
Una volta asciugata questa pellicola negativa, la si pone a contatto con una lastra di metallo sensibilizzata con una colla speciale, noi per esempio, usavamo la Freuendorfer una colla sensibile tedesca. Si distribuiva questa colla sulla lastra in modo uniforme per mezzo di una centrifuga e si faceva asciugare il tutto. Poi veniva trasferita la negativa sulla lastra di zinco proiettando l'immagine da stampare per mezzo di luci ad arco di carboni che emettevano una luce UV. Si impressiona lo smalto con la luce UV, dopo si prende questa lastra impressionata, si spoglia con l'acqua per cuocerla ad una temperatura di 300° circa, finché diventa marrone lo smalto, così che poi è pronta per l'incisione all'acido nitrico che è diluito 1:4 – 1:5.
Buttata sulla lastra crea degli alti e dei bassi, dove c'è lo smalto l'acido non incide, mentre l'acido inciderà dove è andato via lo smalto scavando un solco di una profondità che varia a secondo di quanto la si lascia in immersione nell'acido.
Poi la lastra viene tagliata e stampata.
Per stampare l'immagine la si monta su una pagina, la si inchiostra e per mezzo di un torchio si preme la carta sul cliché ed è così che esce la stampa sulla carta.
Io facevo il cliché per metterlo nella pagina del giornale.>

Pugilato Fotografia di F. F.

Questo è quello che mi ha detto Franco Franzini, un fotografo come ce ne sono stati tanti, un po' dappertutto in Italia e come tutti loro, un po' speciale.

Franco è nato il 15.4.1938, nel 1955 a 17 anni inizia a lavorare per la Libertà, giornale col quale collabora per circa 60 anni, poiché ancora oggi lui è considerato come una persona in grado di rendersi utile. Tony Graffio

English Text


Franco Franzini Photographer and Zincographer

I met a photographer from the province who worked for a very long period of his life for a local newspaper and also for monthly magazines and other areas that needed his experience and the use of photography. Time ago the photographer was recognized as a skilled creative acting in the field or in the studio, using his own taste and not common technical knowledge.
Listening directly from Franco Franzini about his work we realize the great changes of our society, the needs of the client and the speed with which you could do things in the past, thanks to the contribution of various professionals who now have completely disappeared to make room to a few people who run the rotogravure printing of newspapers and magazines.
The production process to transform photographs into images to be printed on paper by means of matrices relief has changed a lot over the last 30 years. From a technical-mechanical and chemical type typographic we moved to the use of computers to digital techniques which then see the use of rubber sheets, flexography.
The site where it was much of the photographic work of preparation of the matrix and the print is today in conditions of semi-abandonment, that is where I met Franco.
To have been here helped me to understand how things worked in a newspaper until 30 years ago. Now I seemed to enter into a forgotten world where our photographer continues to move as a single surviving to an epidemic that has swept away all.
In a messy and dusty shelter, I still find the equipment that served to illuminate and to record the subject. Here and there, I can see also mountains of negative stuffed into large bags, but also preserved more carefully.

In one room there is an old enlarger Durst Laborator 3S with a tilting plan that was used to print up to the format cm. 13X18 (5X7), but also to reproduce the images that you want to prepare arrays of zinc for letterpress printing.

Many photographs here and there tell the stories of a past life to document the events that entertained, amused or worried about the fellow citizens of Franco.

In a larger room, on some aluminum tubes, is placed a backdrop of paper that is the background to the characters and objects taken in the studio, there is still a lighting system with diffused light, the bank plane in years 1970 was a great innovation, but now a few photographers use such light system.

Around there are furniture, books, large sheets of zinc, lead characters, tripods, old light fixtures and other things. But you can not turn on the light because the recent storms have probably caused some short circuit, so we stay for a while in the twilight; then Franco toches some cables and can fix the energy black-out.

The last room is a bit smaller, here there is another darkroom with another smaller Durst enlarger, it is a 609 that goes back, like the other, around the end of 1960. Franco still uses occasionally it to print smaller sizes format, while the large format are printed in contact.

I hear that in the past photographers did not even have self positive paper, or Polaroid, if you wanted to create print immediately, at a trade show, for example, or at other public event where there was the need to immediately deliver a print to the person, the subject were photographed by inserting photo paper in the chassis, then it was developed in the basin and after fixed, washed and dried quickly, you have to take another picture with another sheet of paper to obtain a positive .
Franco gave me a negative sheet to publish on the blog, it's a discard that had contaminated with acids while operating this demonstration last September in Castel San Giovanni.

For the city, the river is crucial, Franco began to tell of a series of episodes and characters that do not exist anymore, but he has seen and photographed.
Another passion was sport and boxing in particular.

He shows me the photograph which had made his colleagues when he was retired and many other images that are part of its history.
I'm a bit surprised of seeing plastic bags of the type used to empty the garbage full of negative and ask him if I can take them, but he says that I can choose a single chunk. Although it looks all useless material and in poor storage conditions, he did not want to lose his photographs, you do not even know if in the newspaper someone still remembers that there is this "archive".

I think this is of shots that have never been used and that the newspaper probably keep only what he published, but it is something that I think to myself, to justify to myself what I see.
On one side I was perplexed to see this building fell into oblivion and a forecourt that maybe is just waiting to be sold, but on the other I am fascinated to see this man who continues to try to save a world that it has already collapsed on him, without he could do anything to stop the time.
Perhaps, in reality, we are all living a bit so i these days where there is no data to know how much can last the latest technology, or because there are no more certainties in this world, nor of what we will live tomorrow.
At his age, I understand that you had to work a lot, you did the day of photo shoots, then developed films and finally, at night you had to work in typography to prepare arrays of zinc plates that later would serve to illustrate the pages of newspaper.
For me it is a process that I did not know and I have never seen, so I try to listen carefully to see if it can still be useful to know the technique known as zincography.

This is what Franco remembers of that technique.

<First you need to reproduce the picture you chose using the enlarger, putting a mezzotint screen between photography and film lith. The goal of the enlarger (player) takes the photograph, you put the screen in the door and above the negative film to expose; lights to be reproduced and exposing the film lith, after developing the exposed film in development lith, so you will get an image with grid in the middle of 25/40 lines / mm.
When this negative film is dried, the negative is contacted with a metal plate coated with a special glue. We used the Freuendorfer, a sensitive German glue. This glue is distributed on the plate in a uniform manner by means of a centrifuge and later was drying.
Then it was transferred to the negative on zinc plate projecting the image to be printed by means of arc lights of carbon emitting UV light. It impresses the enamel with UV light, after you take this plate impressed. It is stripped with water.
The plate had to cook to a temperature of approximately 300 °, until it becomes brown enamel, so that it is then ready for etching by nitric acid which, usually diluted 1: 4 - 1: 5.
Thrown on the plate, this liquid creates ups and downs, where there is the acid does not affect the enamel, while the acid will affect where you went away the enamel digging a furrow to a depth that varies according to how much is left in immersion in acid.
Then the plate is cut and printed.
To print the image is mounted on the one page, it is inked by means of a press and press the paper onto the cliché and it is so coming out printing on the paper.
I did the cliché to put it on the page of the newspaper.>


Franco was born on April 15th 1938, in 1955 at age 17 he began working for La Libertà (Freedom), newspaper with he collaborates for about 60 years, since he is still considered as a person in a position to be helpful. Tony Graffio